No products
Bloc lien
Mini-plant SSM-200-12MK - installation for the production of monolithic...
Protein foam concentrate "Etalon", is designed for the production of...
Mini-plant CCM-1000-40M1, relative to its older version CCM-1000-40M,...
Viewed products
The complex is designed for the...
The complex is designed for the production of foam concrete and/or...
Sleeve (hose) plastic PVC (B) d = 76 is made of transparent plastic...
A new type of foam generator CCM-PG-300 is integrated into the design of...
Mobile equipment for the production of concrete with a fraction of up to...
CCM-OT-500
New product
The complex is designed for the production of foam concrete and/or polysterene concrete with a capacity of at least 3.5 m3 per hour.
Performance | 3.5 m3/hour |
Working capacity of the mixer | 500 liters |
Supply voltage | 220V and/or 380V |
The range of densities of the resulting foam concrete | D150 - D1200 |
Vertical feed range | 40 meters |
Horizontal feed range | 120 meters |
Average total power consumption | 8 kWh |
Weight | 780 kg |
Frequency | 50 Hz |
Water pressure in the main line | At least 1 bar |
Engine | 2.2 kW / 5.5 kW |
Receiver | pump volume: 650 liters |
Drive type | belt |
Country of origin | Russia |
Guarantee | 12 months |
Equipment for the production of foam concrete, polysterene concrete
This set of equipment is built on the basis of an open-type mixer without pressure. The volume of the mixer is 500 liters with combined mixing system, electronic water and foam dosing system. After preparation of a mortar the amalgamator unloads the mixer in the pump hopper which is located under the amalgamator.
Further, the pump discharges the mixture through the hose to the place of laying, and a new volume of mortar is prepared in the mixer. This approach provides for higher productivity, since there is no downtime for preparation of the mixture, all operations occur simultaneously.
Application of equipment
Equipment like mini plants can be used to organize monolithic works on construction site (walls, roofing, flooring, etc.), as well as allows you to organize the shop for the production of blocks and other piece products. Set can be retrofitted with belt and screw conveyors with weighing hopper for electronic dosage of cement, sand and other bulk components.
Equipment reliability
Like all equipment of the company, the complex SSM-OT-500 is made with a high margin of safety, belt drive, German gerotor pairs, reliable motors and gearboxes with a system of protection against abnormal situations during production, and robust construction.