Принимаем звонки ежедневно, с 9 - 18 часов. Закажите звонок, звоните менеджерам: 8 (495) 9696342, 8 (812) 9833511 или пишите myzavodcom@ya.ru

Viewed products

Universal mini plant SSM-300, for foam concrete, concrete and other solutions

New product

 

Mini-mill SSM-300 is a versatile solution and is designed to address a wide range of tasks in the field of construction and production of finished products (blocks, foam blocks).

More details

1 Item

515 400 ₽

Data sheet

Dimensions (L x W x H) 1700х1200х1000
Total weight of the mini-mill 380
Performance до 2 м3
Working capacity of the mixer 320 литров
Operating air pressure of the mixer до 3 атм
Supply voltage 220/380В
The range of densities of the resulting foam concrete 150-2000
Vertical feed range 8 метров
Horizontal feed range 25 метров
Average total power consumption 3,2кВт
Service personnel 2 человека
Maximum water dose per cycle 999
Minimum water dose per cycle 1
Foam performance 500 литров/минута
Foam density range от 20 до 200 грамм/литр
Guarantee 24 месяца

More info

Versatility of the machine allows you to produce a mixture of foam concrete, polysterene concrete, concrete, various mortars.

Production of foam concrete, polysterene concrete
One of the main purposes of the installation SSM-300 is the production of foam concrete of different densities. The range includes ultra-lightweight foam concrete D150 to heavy, structural non-bearing D1200. Also in accordance with the formulation of the equipment is ready to produce polysterene concrete, expanded clay aggregate concrete.

Large concrete mixer.
If you have at your facility is the task of making concrete and similar mortar, poured (serve) on the spot, the mini-factory SSM-300 is ideal for this task. The machine has a reliable, reinforced drive, with a powerful electric motor and gearbox. The blades have a special design for universal use. The SSM-300 mini-mill is ready for the production of such mortars.

Two types of discharging the mixture
Mixer of mini plant SSM-300 has two types of discharging. Standard for our machines pneumatic unloading through the hose reinforced DN 50 or DN 80, and also has a bottom valve, to unload the mixture into a pump, feeder or cart. For the convenience of the lower unloading is possible to raise the mixer above the floor level at 800mm (optional). The type of elevator is different: manual, electromechanical.

Perfect work from the network 220V or 380V
The machine is designed to work with 220 or 380 V without losing efficiency of the drive. Equipped with a system of electronic protection of the motor, reverse, adjustable speed of the mixer shaft.

Ease of operation, moisture protection
The control cabinet is moisture-protected and modernized. The control system of dosing devices is hidden from dust, dirt, which ensures long life of its controls.

Upgraded foam generator
The control elements of the foam generator are housed in a dust-proof cabinet. The most important components and gauges are always kept clean and locked in the cabinet against accidental adjustments. In the foam generator system an additional foaming unit is added, which allows to work with all known domestic and foreign brands of foaming agent of any type.

Warranty
The machine is made of reliable units and assemblies, allowing for a long factory warranty. All machines CCM-300 and higher have a 24-month warranty.

Post-warranty service
We provide any spare parts and all units for the mini-mill within 15 years. Organized a wide network of parcel delivery points throughout Russia and the CIS.

Accessories

30 other products in the same category: