No products
Bloc lien
Mini-plant SSM-200-12MK - installation for the production of monolithic...
Protein foam concentrate "Etalon", is designed for the production of...
Mini-plant CCM-1000-40M1, relative to its older version CCM-1000-40M,...
Viewed products
Water dosing system DC-5 is a...
The complex is designed for the production of foam concrete and/or...
Sleeve (hose) plastic PVC (B) d = 76 is made of transparent plastic...
A new type of foam generator CCM-PG-300 is integrated into the design of...
Mobile equipment for the production of concrete with a fraction of up to...
dc5
New product
Water dosing system DC-5 is a convenient and reliable equipment that allows you to dose the volume of water according to a pre-programmed algorithm.
32 Items
In Stock
Dimensions (L x W x H) | 330х210х140 mm |
Supply voltage | 220V ±10% |
Average total power consumption | 60 W |
Weight | 3,1 kg |
Maximum water dose per cycle | 999.9 liters |
Minimum water dose per cycle | 1 liter |
Lowest flow rate when dispensing | 0.01 m3/h |
Nominal flow rate at dispensing | 2,5 m3/h |
Maximum flow rate when dispensing | 5,0 m3/h |
Relative error | ±2,5 % |
Frequency | 50Hz ±1 |
Water pressure in the main line | not more than: 1.0 (10) MPa (kgf/cm) |
Water temperature | 5-50°С |
Diameter of nominal passage | 20 mm |
The digital dispenser works as follows:
If you do not change the set amount of water, all subsequent doses are made by pressing one button.
Digital counter as a part of the dispenser DC-5 has a flexible logic, different options for setting - direct and reverse counter. It is equipped with two built-in power relays, one of them is not activated. It is possible to connect an additional device.
The dispenser is used in food, meat-processing, adhesive-gelatin, confectionary, bakery, mixed fodder industry; in production of foam concrete blocks, building materials, chemical industry, etc.
Translated with www.DeepL.com/Translator (free version)