Bloc lien
It is used for the erection of bearing walls in low-rise construction, as well as for the construction of walls in high-rise construction with monolithic frame technology. Ecologically clean composition: cement, sand, water and protein blowing agent (protein). When ordering large quantities, the price is individual.
Once you set the desired amount of liquid, then press the "Start" button and the system will measure the set amount of liters. If you do not change the set amount of water, all subsequent doses are made by pressing one button.
Model SSM-50-M1 mini plant has a small mixer of 50 liters, a high-performance foam generator and a reliable drive. It is designed for the production of foam concrete with capacity up to 0.5 m3/hour. It is often used for laboratory purposes: formulation selection, testing of raw materials and additives.
Mini-plant SSM-E-200/250 Economy is a simplified version of the company's standard units of serial models SSM-200-12M or SSM-250-15M.
The SSM-200-mini-plant has on its board a mixer, a new generation of foam generator and a pump for supplying foam concentrate. Application of the mini-plant: for monolithic pouring with foam concrete or the manufacture of foam blocks of various densities (from 150-1200 kg / m3). Equipped with a bearing pressure compensation chamber.
The gerotor pump is used for transporting construction mixtures that may contain various fibers (e.g. fiberglass) and aggregates. The pump is also widely used in finishing and plastering works.
A new type of foam generator is integrated into the design of the SSM-250-15M mini-plant, as well as a foam concentrate feed pump. Application of the mini-plant: for monolithic filling with foam concrete or the manufacture of foam blocks of various densities (from 150-1200 kg / m3). The productivity of the equipment is 1.5-2.0 m3 / hour (15 cubic meters,...
Mini-plant SSM-200-12MK - installation for the production of monolithic foam concrete (CLC) and foam blocks (CLC block). The standard equipment of the plant is supplemented with a Remeza SB4 / S-100 compressor with a capacity of 360 l / min, 10 atm.
A new type of foam generator CCM-PG-300 is integrated into the design of the SSM-250-15MP mini-plant, as well as a pump for feeding the foam concentrate. The standard equipment is complemented by a compressor. Application of the mini-plant: monolithic filling with foam concrete or production of foam blocks of various densities (from 150-1200 kg / m3).
Mini-plant CCM-500-30M is a renewal line built on the basis of a mixer with a working capacity of 510 liters. A new generation foam generator is integrated into its design, providing a homogeneous homogeneous mass and a pump for feeding the foam concentrate.
The new version of the mini-plant SSM-500-30M1 is equipped with an electronic system for dosing water and foam. And also an SSM-FC-500 foam generator is installed in the platform of the mini-plant.
Mini-mill SSM-300 is a versatile solution and is designed to address a wide range of tasks in the field of construction and production of finished products (blocks, foam blocks).
Mobile equipment for the production of foam concrete, polysterene concrete and other types of cellular concrete.
The updated design of the SSM-1000-40M mini-plant has a built-in foam generator and a pump for feeding the foam concentrate, as well as the bearing assembly of the mixer is equipped with a pressure compensation chamber to increase the service life of the entire assembly and eliminate the loss of cement laitance.
Mini-plant CCM-1000-40M1, relative to its older version CCM-1000-40M, has been supplemented with electronic dosage of water and electronic dosage of foam. An integrated new generation foam generator and a mixer equipped with a durable and technically efficient bearing unit with a pressure compensation chamber remain unchanged in the design of the mini-plant.
Plastering station SSM-SS-01 is a reliable unit manufactured by SSM-Holding, designed for finishing work with dry mixes.
The mini-plant was created on the basis of a mixer with a working capacity of 1550 liters. A new generation foam generator is built into the design of the CCM-1500-55M mini-plant, which guarantees the generation of a homogeneous foam mass with closed pores, and a pump for feeding the foam concentrate. The productivity of the plant is 5-7 m3 / hour.
Electronic water dosing and electronic foam dosing are built into the design of the modernized SSM-1500-55M1 mini-car, and the SSM-FC-500 foam generator is integrated. The productivity of the plant is 5-7 m3 / hour.
Plastering station SSM-SS-01 is a reliable unit produced by SSM-Holding, designed for finishing work with dry mixes.