Принимаем звонки ежедневно, с 9 - 18 часов. Закажите звонок, звоните менеджерам: 8 (495) 9696342, 8 (812) 9833511 или пишите myzavodcom@ya.ru

Specials

Viewed products

Mini-plant SSM-1500-55M

New product

The mini-plant was created on the basis of a mixer with a working capacity of 1550 liters. A new generation foam generator is built into the design of the CCM-1500-55M mini-plant, which guarantees the generation of a homogeneous foam mass with closed pores, and a pump for feeding the foam concentrate. The productivity of the plant is 5-7 m3 / hour.

More details

To order, production 2-4 weeks

750 000 ₽

  • Add to order
  • Not required
  • Needed
  • Есть свой
  • 380W
  • Yes
  • No

Data sheet

Dimensions (L x W x H) 2450x1350x1500 mm
Total weight of the mini-mill 980 kg
Performance 5-7 m3 / hour
Working capacity of the mixer 1550 Liters
Operating air pressure of the mixer 0.65 atm.
Supply voltage 380V
The range of densities of the resulting foam concrete 150-1200 kg / m3
Vertical feed range 12 метров
Horizontal feed range 40 метров
Average total power consumption 6.4 kWh
Service personnel 3 persons

More info

Package Included:

  1. Foam concrete mixer SSM-1500-55M - 1 piece;
  2. Built-in foam generator - 1 piece;
  3. Neck attachment with bag knife;
  4. Regulations for the preparation of foam concrete;
  5. Passport for SSM-1500-55M - 1 pc.

Manufacturer's warranty 2 years.

We recommend buying:

  1. Elastic sleeve 20 meters long;
  2. Compressor

Mixer bearing assembly:

Mini-plant SSM-1500-55M is equipped with a bearing unit with a pressure compensation chamber. This type of bearing is used only in professional equipment, which provides for the transportation of the mixture produced by compressed air. This technical solution is the most durable, efficient and technically justified.

If we compare the bearing assemblies of various manufacturers of equipment for foam concrete, then it is worth noting that equipment without a pressure compensation chamber, after one or two weeks of operation, begins to pass the cement suspension (milk) through the first oil seal, and this affects the properties of the produced foam concrete, its strength. Those who are faced with this are forced to increase the consumption of cement, which leads to an increase in the cost of finished products. Miniplant SSM-1500-55M is devoid of this drawback.

When purchasing equipment, we provide technological support. We guarantee fast and high-quality preparation of the mixture and production of aerated concrete in accordance with GOST 25485-89 in the shortest possible time.

When purchasing equipment, we provide technological support. We guarantee fast and high-quality mixing of the mixture, that is, the production of aerated concrete exactly in accordance with GOST 25485-89 in the shortest possible time.

We provide supply of foam concentrate in any quantity.

Related posts

Accessories

1 other product in the same category: