Mini-plant SSM-200-12MK, equipment for foam concrete and compressor

The professional installation of the SSM-200-12MK is distinguished by its small size, stable foam generator SSM-PG-500 which allows you to realize the full potential of the mini-plant. The integrated foam generator ensures consistent foam quality at a mixer fill rate of less than 1 minute.

Application of a mini-plant: for monolithic pouring of foam concrete or manufacturing foam blocks of various densities (from 150-1200 kg/m³). The model gained great popularity by performing work in monolithic construction, pouring foam concrete into the formwork (Light Steel Formwork, removable and non-removable formwork).

The advantages of our mini-factories:

1. Bearing units are equipped with cameras for high atmospheric pressure.
2. For this type of equipment with a mixer capacity of up to 0.3 m3, a pulley-belt-gear drive is installed, which ensures a more durable operation of a mini-plant, in contrast to the use of a gearmotor.
3. The foam generator and pump are integrated into the mini-plant mixer.
4. Added additional foaming into the foaming channel system.
5. The ability to manufacture insulating foam on low-cost protein foam.
6. Transportation of foam concrete to be made at the expense of compressed air from the compressor (the pump is not required).
7. Increased maintainability.

Package Included:

1. Foam concrete (CLC) mixer SSM-200 - 1 pc.
2. Built-in foam generator - 1 pc.
3. Nozzle on the neck with a knife for bags - 1 pc.
4. Shut-off valve, disk swivel and quick-release connection (for unloading foam concrete) Ø 50 - 1 pc.
5. Drawings of metallic forms for CLC block's.
6. Instructions for the production of foam.
7. Instructions and passport for equipment.

We recommend to purchase:

1. PVC hose for unloading foam.

The use of this set of the mini-plant SSM-200-12MK and observing the regulations for the production of foam concrete guarantees the manufacture of non-autoclaved hardening concrete according to the technical parameters of the quality standard GOST 25485-89.

Why are CCM installations the best?

• For the production of the mixer, we use metal with a thickness of 8 mm, this allows us to operate the machine for 8 or more years without the appearance of barrel-shaped deformation of the mixer (for thin mixers working with pressure, the barrel effect appears already after the first active season of work).
• We do not use worm gear motors.
• Powerful foam generator without surcharges. It produces high-quality foam, stably and without permanent add-ons.
• The full-body shaft from a steel circle of D56 of wearproof steel 40X.

More information about the equipment of the company can be read in the article.