Foamer "Etalon-M"

Foamer "Etalon-M", protein
The volume weight of foam concrete can be in the range of 100 - 1800 kg/m3. Protein blowing agent "Etalon" is fully protein, which provides better characteristics of foam stability in the cement mortar, and most importantly, higher strength properties of foam concrete. Protein foam generator "Etalon" allows you to get a very high quality fine foamy concrete.

The appearance of foaming agent has a light brown color, its physical and chemical properties of density at 20 ° C is 1120 kg/m3. Hydrogen index pH = 6.5 - 8.0. Freezing point - minus 25 ° C, but after thawing foamer properties do not change.
Guaranteed shelf life 24 months at temperatures from +40 ° C to -50 ° C in the original packaging without direct sunlight. Non-toxic.

Terms of sales (discounts):

1. When buying from 0 to 240 kg, the price of 95 rubles/kg;
2. When buying from 240 to 480 kg, the price of 85 rubles/kg;
3. When buying from 480 kg, the price is 80 rub/kg.

Instructions for the preparation of the working solution of foam on Etalon-M
Working solution is prepared as follows:

1. Fill a cubic tank with water 950 liters;
2. Pour the protein blowing agent "Etalon" in an amount of 25 liters into the cube capacity and mix thoroughly;
3. Through the foam generator we obtain a foam weight of 50 g/l and start the production.

Properties of the protein blowing agent "Etalon"
Protein blowing agent "Etalon" produced according to TU 2483-003- 13420175-2015 is designed for the production of technical foam used in the manufacture of foam concrete of different grades and different equipment. The bulk weight of foam concrete can be in the range from 100 to 1800 kg / m3.Protein blowing agent provides better characteristics of the stability of the foam in the cement mortar, and most importantly, higher strength properties of foam concrete. Protein foamer "Etalon" allows you to get a very high-quality fine-porous foam concrete and save cement up to 20% in contrast to those presented in our Russian market foamers as of Russian manufacture, and imported.

Characteristics of technical foam based on protein blowing agent "Etalon"
Before each pouring from the original packaging you need to stir the concentrate by hand. The concentration of the working solution is 1.5 - 2.5%, i.e. 1 kg of foaming agent is diluted with water at a ratio of 1:60, 1:50, 1:40, respectively.

• Appearance of foam: White color with uniform microporous structure.
• Foam multiplicity: 7 to 50
• Foam resistance in cement mortar: at least 98%.
• Output of foam from 1 kg of foaming agent: 830
• Syneresis (separation of the first drop): at least 10 min.

After a long stop of production (not more than 30 days) the diluted working solution does not require rejuvenation, it only needs to be stirred manually.

CCM-Holding is the official dealer of ETALON foam concentrate in the North-West region. The products are always available in stock, we guarantee the volume and efficiency of delivery.