Принимаем звонки ежедневно, с 9 - 18 часов. Закажите звонок, звоните менеджерам: 8 (495) 9696342, 8 (812) 9833511 или пишите myzavodcom@ya.ru

Specials

Viewed products

SSM-50 mini-plant (laboratory station)

New product

  • Model SSM-50-M1 mini plant has a small mixer of 50 liters, a high-performance foam generator and a reliable drive. It is designed for the production of foam concrete with capacity up to 0.5 m3/hour. It is often used for laboratory purposes: formulation selection, testing of raw materials and additives.

More details

146 870 ₽

  • Add to order
  • Not required

Data sheet

Dimensions (L x W x H) 1200х500х600
Total weight of the mini-mill 60 kg
Performance 0,5
Working capacity of the mixer 50 liters
Operating air pressure of the mixer up to 3 atm.
Supply voltage 220 or 380
The range of densities of the resulting foam concrete D150 - D1400
Average total power consumption 2.5 kW
Service personnel 1 person
Foam performance 500 l/min
Foam density range 20 to 200 g/liter
Engine 1.5 kW
Manufacturer SSM-Holding
Execution on a frame, no wheels
Guarantee 24 months

More info

Who and what do you need a laboratory mini plant SSM-50-M1 for?
The model is used for the production of foam concrete and other cellular concrete in the following cases:

At the existing plant for the production of foam concrete and newly organized
The main task of the installation to save money. Typically, before the release of high-quality foam concrete producer makes a huge number of experiments with raw materials, additives, production conditions, curing conditions, and so on. Then, picking up his golden recipe and technological conditions for the production of foam blocks. Laboratory mini-factory will allow you to spend a minimum of raw materials and additives, as well as a minimum of time for the production of samples of foam concrete. For example, to implement the first 5 (five) test mixing the production of foam concrete grade D600 on any mixer with a capacity of 1000 liters, will be spent on average:

  • Cement: 1500 kg;
  • Sand: 1400 kg;
  • Foamer: 6-8 kg.

At the same time, to run the recipe on the laboratory mini plant you will need:

  • Cement: 75 kg;
  • Sand: 70 kg;
  • Foamer: 300 grams.

Then, when you start production in the normal mode to make a window for experimenting with additives, new formulations - an expensive event, as you need to have time to produce the maximum product while there is a season.

Laboratory setup SSM-50-M1 will save your business time and money, allowing at any time to test the raw materials and additives, and the first to introduce the obtained result in the general production.

For laboratories and research and construction companies, manufacturers of construction chemicals
Mini Factory SSM-50-M1 is actively used in the testing, preparation and testing of additives in laboratories and scientifically construction companies. For example from the field of foam concrete: the producers of foaming agents, plasticizers, gas pedals, antifreeze formulations.

Mini-plant CCM-50-M1 - classic, has a horizontal shaft, adjustable speed (default 55 rpm), pneumovygotovkruzku. Like all equipment of the company, the unit is made with reliable units and assemblies. Warranty is 24 months.

Accessories:

  1. Mixer 50 liters;
  2. Foam generator SSM-PG-500;
  3. Pressure chamber comensatsii;
  4. System of automatic dosing water additives;
  5. System of automatic dosage of foam;
  6. Pump for suction of foaming agent;
  7. The passport of the product;
  8. 2FK100 cube mold for sample production (optional).

Recommended to purchase:

  1. A hose for unloading the mixture (we sell from 1 meter);
  2. Compressor 250-300 l/min, 8atm.

Accessories

30 other products in the same category: